close

Вход

Забыли?

вход по аккаунту

?

Новый текстовый документ

код для вставкиСкачать
root@OpenWrt:~# cd /sbin
root@OpenWrt:/sbin# ./cm
***************************************************************************
* *
* WiMax CM Text Version 1.4.5 *
* Copyright (c) 2008-2010 GCT Research, Inc. *
* *
***************************************************************************
[SDK] SDK Log Level:1
[SDK] SDK Version:1.6.8
dhclient thread is ready!
Auto connection is ready!
ARM Capability:
Encryption XML
CAPL
device[1] status [RF_OFF_HW_SW]
BL version: 0.0.0.0
HW version: 0.0.7.0
SW version: FW(1.11.0.1 : 1.9.9.4)
--------------- Begin loaded configurations ---------------
[common]
Log path: /var/log/gct
Log level: 1
EAP log: enabled
Embedded EAP: enabled
OMA-DM: disabled
Non-volatile path: /var/cache/gct
Default script file:
Auto connection: enabled
Auto connection retry count: 1000
Auto selecting profile index: 0
Unknown network auto connection: enabled
IP allocation timeout: 30 sec.
Disconnect on ip failure: enabled
[device-default]
AUTH PKM: enabled
EAP type: TTLS_MSCHAPV2
TTLS user id: 0108768@kem
TTLS user passwd: lhb434h
TTLS anonymous id: 0108768@kem
TTLS private key passwd:
TTLS frag size: 1300
TTLS delimiter: disabled
TTLS null dev cert: enabled
TTLS null ca cert: enabled
TTLS resumption: enabled
TTLS cr801: disabled
TTLS decoration:
TTLS session-ticket: enabled
---------------- End loaded configurations ----------------
[SDK] #ERROR: in wm_set_eap [lr:41992c]
:Embedded EAP TLS is NOT supported!
Auth configuration failure
Request auto connection device(1)
[Profile-Index] [Profile-ID] [Profile-Name]
0 01FFF001 WI-TE:WI-TE
Profile index is 0
vpos: Rx-burst=f8000078, Tx-burst=f800a400,f8011388
vpos: Loading WiMAX functions... (start=0x10648000, end=0x1064f6c0, size=30400)
vpos: WiMAX functions are loaded. (v1.9.9:1.11.1, 2010/08/22 15:42:56, boot=180c )
DM> device[1] Power ON
device[1] status [Ready]
device[1] status [Scanning]
ADC: 127,1
==============================================================
GDM720X TxCL start ==========================================
0x0C = 0xA640 : tx_dci = 7, tx_dcq =17
0x0C = 0xA640 : tx_dci = 6, tx_dcq =14
0x0C = 0xA640 : tx_dci = 1, tx_dcq =19
0x0C = 0xA640 : tx_dci = -2, tx_dcq =16
GDM720X Tx imb ==============================================
[Freq:3400] WimaxTx : tx_phase_mis = 0, tx_gain_mis = 0
[Freq:3450] WimaxTx : tx_phase_mis = -1, tx_gain_mis = 0
[Freq:3500] WimaxTx : tx_phase_mis = -1, tx_gain_mis = 0
[Freq:3550] WimaxTx : tx_phase_mis = -1, tx_gain_mis = 0
[Freq:3575] WimaxTx : tx_phase_mis = -2, tx_gain_mis = 0
[Freq:3600] WimaxTx : tx_phase_mis = -2, tx_gain_mis = 0
GDM720X RX imb start =========================================
[Freq:3400] Final Rx imb main (dp, dg) = (-1, -6)
[Freq:3400] Final Rx imb div. (dp, dg) = (-1, 2)
[Freq:3450] Final Rx imb main (dp, dg) = (-2, -8)
[Freq:3450] Final Rx imb div. (dp, dg) = (-1, 1)
[Freq:3500] Final Rx imb main (dp, dg) = (-2, -7)
[Freq:3500] Final Rx imb div. (dp, dg) = (-2, -1)
[Freq:3550] Final Rx imb main (dp, dg) = (-2, -7)
[Freq:3550] Final Rx imb div. (dp, dg) = (-2, -2)
[Freq:3575] Final Rx imb main (dp, dg) = (-1, -7)
[Freq:3575] Final Rx imb div. (dp, dg) = (-1, -2)
[Freq:3600] Final Rx imb main (dp, dg) = (-2, -7)
[Freq:3600] Final Rx imb div. (dp, dg) = (0, -2)
GDM720X RX lna start =========================================
Freq : 3400, 3500, 3600,
Rx 0 M: 0x1A00,0x1A40,0x1AC0,
Rx 0 L: 0x1740,0x1740,0x1740,
Rx 1 M: 0x1A80,0x1B40,0x1C40,
Rx 1 L: 0x1740,0x1740,0x1740,
==============================================================
network list=0 (elapsed 1sec.)
network list=0 (elapsed 2sec.)
network list=0 (elapsed 3sec.)
network list=0 (elapsed 4sec.)
network list=0 (elapsed 5sec.)
network list=0 (elapsed 6sec.)
network list=0 (elapsed 7sec.)
device[1] status [Ready]
device[1] status [Scanning]
[NSP-Name] [NSP-ID] [RSSI] [CINR]
WI-TE FFF001 -69 18
HOME Operator WI-TE is selected
Connect to WI-TE
Auto connect done
device[1] status [Connecting]
device[1] Connection Progress Info [Ranging]
device[1] status [Connecting]
device[1] Connection Progress Info [SBC]
device[1] status [Connecting]
device[1] Connection Progress Info [Registration]
device[1] connection FAIL
device[1] status [Ready]
device[1] status [Scanning]
device[1] status [Ready]
device[1] status [Scanning]
device[1] status [Ready]
device[1] status [Scanning]
device[1] status [Ready]
device[1] status [Scanning]
device[1] status [Ready]
device[1] status [Scanning]
device[1] status [Ready]
device[1] status [Scanning]
^Z[1]+ Stopped ./cm
root@OpenWrt:/sbin#
Автор
archlordttt
Документ
Категория
Без категории
Просмотров
69
Размер файла
5 Кб
Теги
текстовые, документы, новый
1/--страниц
Пожаловаться на содержимое документа