close

Вход

Забыли?

вход по аккаунту

?

Gesamtprospekt Englisch

код для вставкиСкачать
Akaram Ltd.
Conveyor belts and felts
for bakery installations
Swiss Quality – Product
Akaram Ltd.
Weinbergstrasse 5a
P.O. Box 503
CH – 6301 Zug / Switzerland
Tel.: +41 (0) 41 711 23 79
Fax: +41 (0) 41 711 24 33
e-mail: info@akaram.ch
www.akaram.ch
Our products
Conti Bake BE 6570
Conti Bake Technical Data sheet
Conti Bake Splice SS 52
Conti Bake endless
Wool Felts
MATLON Q110, PE/WO 1500/3, PE 1800/3
Fabrics
MATLON PE 1270, PE 9001, PE 8923, PB 9005, PE 9379
Trays and Baskets for proofer installations
Round moulder belts
Biscuit belts
Roller Covering
MATLON SG
Akaram Ltd.
Bakery belt with woven-in plastic polyester spiral or
endless woven
CONTI BAKE BE 6570
Technical Data
Applications
- polyester belt
- standard weight: 1'500 g/m2
- thickness: 2.2 mm
- air-permeable
- FDA-approved, safe for foodstuffs
- tear strength at break 28 % / 166 kN/cm
- friction-efficient on stainless steel 0.5
- temperature-resistant up to 120° C constant
higher briefly
- dough-repellent, non-stick
- felt-like surface
- transversely rigid + true running
- washable, easy to clean
- mildew-resistant
- baking tunnels
- dough transport with knife edge
transfer
- dough processing (dough
working)
- deposit systems
Available executions
- thinner version: CB 6573, 1.2 mm thick for knife edges from Ø 4 mm
- Wool surface: CB 6570 W
- Impregnations with: Silicon, PU or Acrylic
Akaram Ltd. ▪ Weinbergstrasse 5a ▪ P. O. Box 503 ▪ CH – 6301 Zug / Switzerland
Tel: +41 (0) 41 711 23 79 ▪ Fax: +41 (0) 41 711 24 33 ▪ info@akaram.ch ▪ www.akaram.ch
Akaram Ltd.
Bakery Belt CONTI BAKE BE 6570 – standard version
Technical Data:
Type:
CONTI BAKE BE 6570
Belt construction:
Top side / dough-cake side:
100% Polyester, multifilament, with a polyester needle effect
for non sticking of the dough, cross monofilament for high
stability
Running Side:
100% Polyester, monofilament, coefficient of friction 0,15 on
stainless steel
Colour:
white
Belt thickness:
2.2 mm
Belt weight:
1.5 kg/m2
Braking resistance:
144 kg / cm
Brake point:
28% elongation
Temperature resistance:
with silicon impregnation:
normal 120°C, peek up to 170°C
normal 140°C, peek: up to 185°C
Belt dimension:
any width and length possible to produce
up to 4’000 mm width without any additional splice
Chemical qualities:
resistance against water, humidity, oil, grease and dough
Splicing:
– woven-in plastic polyester spiral
– endless woven
Cleaning:
belt can be cleaned with any type of chemical products, hot
water, high pressure, etc.
Akaram Ltd. ▪ Weinbergstrasse 5a ▪ P. O. Box 503 ▪ CH – 6301 Zug / Switzerland
Tel: +41 (0) 41 711 23 79 ▪ Fax: +41 (0) 41 711 24 33 ▪ info@akaram.ch ▪ www.akaram.ch
Akaram Ltd.
Woven-in plastic polyester spirals
Endless woven version
for all CONTI BAKE types
woven-in plastic polyester spirals available in various types:
– SS 52 standard from Ø 8 mm
– SS 53 small spirals from Ø 6 mm
– SS 52 PEEK temperature-resistant up to 300° C
SS52
Endless woven – without any splice
for knife edges from Ø 6 mm
Akaram Ltd. ▪ Weinbergstrasse 5a ▪ P. O. Box 503 ▪ CH – 6301 Zug / Switzerland
Tel: +41 (0) 41 711 23 79 ▪ Fax: +41 (0) 41 711 24 33 ▪ info@akaram.ch ▪ www.akaram.ch
Akaram Ltd.
Endless Wool felt
MATLON Q110
Technical Data
- endless woven and milled
- tensile weave, wool and PES
- 100 % wool, natural white
- Weight: 1'500 gr/m2
- min. 3 – 3.5 mm thickness
- thermofixed and stabilised
- suitable for knife edges from Ø 4mm
- dough-repellent, non-stick
- circumferences from 100 mm up to 10’000 mm
Akaram Ltd. ▪ Weinbergstrasse 5a ▪ P. O. Box 503 ▪ CH – 6301 Zug / Switzerland
Tel: +41 (0) 41 711 23 79 ▪ Fax: +41 (0) 41 711 24 33 ▪ info@akaram.ch ▪ www.akaram.ch
Akaram Ltd.
SPREADER BELTS endless, wool surface
with PES core = smallest elongation
MATLON PE/WO 1500/3
Technical Data:
-
both side wool surface
standard thickness 2.5 – 3 mm
also available in other thickness
endless woven, without splice
with a strong Polyester core, elongation max. 1 – 2 %
safe for foodstuffs, FDA approved
impregnation possible
delivery from stock
Applications:
-
spreader belts for long transports
for special applications
moulder belts with wet processing
high tensile force for dough processing
Akaram Ltd. ▪ Weinbergstrasse 5a ▪ P. O. Box 503 ▪ CH – 6301 Zug / Schweiz
Tel: +41 (0) 41 711 23 79 ▪ Fax: +41 (0) 41 711 24 33 ▪ info@akaram.ch ▪ www.akaram.ch
Akaram Ltd.
Endless woven 100% Polyesterbelt
MATLON PE 1800/3
Technical Data
- endless woven polyester belt, without splice
- PES core
- approx 3.5 mm thick
- tear strength 144 dN/cm
- Force for 1 % elongation 11 dN/cm
- fine woven surface
- oil and grease resistant
- washable
- mass-stable, thermostabilised
- temperature-resistant up to 180° C
- available in all dimensions
- FDA-approved, suitable for foodstuffs
- suitable for knife edges from Ø 5 mm
- dough-repellent, non-stick
Akaram Ltd. ▪ Weinbergstrasse 5a ▪ P. O. Box 503 ▪ CH – 6301 Zug / Switzerland
Tel: +41 (0) 41 711 23 79 ▪ Fax: +41 (0) 41 711 24 33 ▪ info@akaram.ch ▪ www.akaram.ch
Akaram Ltd.
Fabrics for proofer installations
MATLON PE 1270 – PE 8923 – PE 9001– PB 9005 – PE 9379
Technical Data
-
all weave designs in the current market
quality of materials tried and tested over the years
all qualities FDA approved
suitable for use in the food industry in accordance with European regulations and standards =
food safety compliant
very long life
non-stick
not susceptible to mildewing
washable, easy to clean
design version with all desired fixings
modifications of existing fabric installations
high tear resistance
high-quality manufacture using the most up-to-date machines
world-wide references over 15 years
supplier to most European installation manufacturers
new developments of large installations in respect of fabrics
Applications
-
small proofer belting
flat proofer belting
continous proofer belting
linings for fixed installations
Akaram Ltd. ▪ Weinbergstrasse 5a ▪ P. O. Box 503 ▪ CH – 6301 Zug / Switzerland
Tel: +41 (0) 41 711 23 79 ▪ Fax: +41 (0) 41 711 24 33 ▪ info@akaram.ch ▪ www.akaram.ch
Akaram Ltd.
Trays and baskets
for all Proofer Installations / Applications
Quality:
Plastic injection mold made from EU-food approved plastic in white colour
Executions:
-
with open, durably PES-fabric
with natural wool felt
with synthetic wool felt
new: with stainless steel mesh fabric
Advantages:
-
food approved
easy cleaning
washable
chemical resistance
strong fabric for longer lifetime
best proofer-characteristics due to highest air circulation
lowest bacteria contamination due to newest injection mold technology and most modern
materials
Akaram Ltd. ▪ Weinbergstrasse 5a ▪ P. O. Box 503 ▪ CH – 6301 Zug / Switzerland
Tel: +41 (0) 41 711 23 79 ▪ Fax: +41 (0) 41 711 24 33 ▪ info@akaram.ch ▪ www.akaram.ch
Akaram Ltd.
Round moulder belts
MATLON PE/WO 3000/4.5
Technical Data
- 100 % wool felt on belt upper surface / moulding side safe for foodstuffs, FDA approved
- belt under-surface with stable polyester bearer fabric coefficient of friction: 0,2
- with plastic longitudinal sections moulded on to backing side
- all belts manufactured in endless version, also available with mechanical spiral
- can also be used in troughed shape
- all dimensions and profile shapes can be supplied
Applications
- all round moulder installations
- supplier to many German and European system manufacturer
- special designs possible
- tried and tested over 10 years
Akaram Ltd. ▪ Weinbergstrasse 5a ▪ P. O. Box 503 ▪ CH – 6301 Zug / Switzerland
Tel: +41 (0) 41 711 23 79 ▪ Fax: +41 (0) 41 711 24 33 ▪ info@akaram.ch ▪ www.akaram.ch
Akaram Ltd.
Endless woven biscuits-belts
MATLON BW/PE 240/2
MATLON PB 120 BB
MATLON PB 120 BPE
Technical Data:
-
Endless woven, no splices
Thickness: 1.5 – 2 mm
Any dimensions available
Measure stable fixed, no contraction
Woven and impregnated edges
Tested and worked satisfactorily for more than 30 years
Also available with additional coatings such as Silicon, Acryl, PU and others
Application:
-
Suitable for all knife edges
Also suitable for Oven-feeder or discharger
Longtime approved
Akaram Ltd., Weinbergstrasse 5a ▪ Postfach 503 ▪ CH – 6301 Zug / Schweiz
Tel: +41 (0) 41 711 23 79 ▪ Fax: +41 (0) 41 711 24 33 ▪ e-mail: info@akaram.ch ▪ www.akaram.ch
Akaram Ltd.
Roller Covering MATLON SG
Friktionsbelag MATLON SG
Cylinder with diagonal adhered friction
coating
Walze mit spiralförmig aufgeklebtem
Friktionsbelag
Cylindre avec revêtement antidérapant
Hélicoidal adhérant
Thickness:
Stärke:
Epaisseur:
4.0 mm
Width:
Breite:
Largeur:
50 mm
Roll of 30 m ex stock
Rouleau de 30 m départ usine
Rollen von 30 lfm ab Lager lieferbar
Ensure the ends on both sides with screws
Enden beidseitig mit Schrauben sichern
Assurer les bouts des deux côtés avec des vis
Special glue for this application :
BALCO N55 (Cans 5.0 kg ex stock)
Verklebung mit unserem Spezialkleber N55
(Dosen 5.0 kg ab Lager lieferbar)
Colle pour cette application: N55
(boîte à 5.0 kg départ usine)
Akaram Ltd. ▪ Weinbergstrasse 5a ▪ Postfach 503 ▪ CH – 6301 Zug / Switzerland
Tel: +41 (0) 41 711 23 79 ▪ Fax: +41 (0) 41 711 24 33 ▪ info@akaram.ch ▪ www.akaram.ch
Автор
maksimnikitadima
Документ
Категория
Без категории
Просмотров
248
Размер файла
4 241 Кб
Теги
gesamtprospekt, englisch
1/--страниц
Пожаловаться на содержимое документа