close

Вход

Забыли?

вход по аккаунту

?

Untitled

код для вставкиСкачать
2
OWNERS MANUAL
Congratulations on purchasing your VIBE Optisound. Please read this manual in order to fully
understand how to get the best results from this product and ensure that all advice on how to look
after the product is followed.
Thank you for buying VIBE, we hope you enjoy listening to your product as much as we enjoyed
creating it.
3
TERMINALS AND CONTROLS
3
1
2
7
8
4
5
6
1. Analogue Input
For connection to a TV / games console / set top box / DVD player / Blu-ray player with low level
outputs. This is the RCA phono output from your device.
2. Digital Input
For connection to a TV / games console / set top box / DVD player / Blu-ray player with an optical
digital output. This is the recommended connection as the digital input will provide the best sound
quality.
IMPORTANT:
В‡7KHGLJLWDORXWSXWRIWKHGHYLFHPXVWEHVHWWR3&0RXWSXW7KH2SWLVRXQGZLOOQRWSURGXFH
DQ\VRXQGLIWKHGLJLWDORXWSXWRIWKHGHYLFHLVVHWWR'ROE\'LJLWDORU'76
%DVV/HYHO
This control is used to match the input signal of the source to the ampliВїer. 6ee setup guide for more
details.
3RZHU/('
The /ED will illuminate green when the ampliВїer is in operation.
2Q2II6ZLWFK
This switch is used to turn the ampliВїer on and off.
$&SRZHU,QSXW
Wired connection to a mains wall socket.
,QSXW0RGH
This switch is used to select analogue (RCA) or digital (optical) input.
;RYHU)UHT6ZLWFK79GLJLWDORQO\
This switch is used to set the frequency bandwidth of the enclosure. It is recommended that the 50Hz
setting is used on larger TV sets and that 80Hz is used on smaller TV sets. Please experiment with this
switch to see which setting best integrates wiith your TV speakers.
4
ANALOGUE CONNECTION TO A TV SET
t Connecting to the TV set enables any source connected to the TV to be output through
the subwoofer.
В‡ Connect one end of an RCA phono lead (not included) to the analogue input of the
ampliВїer and connect the other end to the RCA audio output of the TV set.
В‡ Ensure that the input mode switch is set to $1$/2*8(
DIGITAL CONNECTION TO A TV SET
В‡ Connect one end of the suplied digital optical lead to the digital input of the ampliВїer and connect
the other end to the digital output of the device.
В‡ Ensure that the input mode switch is set to ',*,7$/
IMPORTANT:
В‡7KHGLJLWDORXWSXWRIWKHGHYLFHPXVWEHVHWWR3&0RXWSXW7KH2SWLVRXQGZLOOQRWSURGXFH
DQ\VRXQGLIWKHGLJLWDORXWSXWLVVHWWR'ROE\'LJLWDORU'76
5
CONNECTION TO MULTIPLE DEVICES
В‡ Connect one end of the supplied digital optical lead to the digital input of the ampliВїer and connect the
other end to the digital output of the TV set.
В‡ Connect each device to the TV set via a HD0I lead or whatever connection method is appropriate for
that device.
В‡ Whichever source is displayed on the TV set is now output through the Optisound.
IMPORTANT:
В‡7KHGLJLWDORXWSXWRIWKHGHYLFHPXVWEHVHWWR3&0RXWSXW7KH2SWLVRXQGZLOOQRWSURGXFH
DQ\VRXQGLIWKHGLJLWDORXWSXWLVVHWWR'ROE\'LJLWDORU'76
6
CONNECTION TO A SINGLE DEVICE
В‡ Connect one end of the suplied digital optical lead to the digital input of the ampliВїer and connect
the other end to the digital output of the device.
В‡ Connect the device to the TV set via an HD0I lead or whatever connection method is appropriate
for that device.
IMPORTANT:
В‡7KHGLJLWDORXWSXWRIWKHGHYLFHPXVWEHVHWWR3&0RXWSXW7KH2SWLVRXQGZLOOQRWSURGXFH
DQ\VRXQGLIWKHGLJLWDORXWSXWLVVHWWR'ROE\'LJLWDORU'76
7
SET UP GUIDE
The VIBE Optisound has an independent volume control which allows integration with your TV
speakers and a wide range of other audio equipment.
To set the volume level of the Optisound please follow the procedure below.
В‡ Connect the Optisound to yout TV or device.
‡ 6et the bass level control on the Optisound to it¶s minimum setting which is fully anti-clockwise.
В‡ Have a game, movie or music track playing and set the volume level on the TV speakers to the
desired listening level.
В‡ 6lowly rotate the bass level control on the Optisound clockwise until the desired sound balance has
been achieved.
To set the frequency (Optisound TV6 digital only) please follow the procedure below.
В‡ First select the lowest setting (50Hz) and listen to a wide range of material.
В‡ 6elect the higher setting (80Hz) and repeat the process.
В‡ 1ow select the frequency that you feel best blends with your TV speakers.
PLACEMENT
The VIBE Optisound has been designed to deliver great sound from almost any location.
6ome experimentation can yield better results.
Below are some recommended installation positions.
For Optimum results it is recommended that the Optisound is installed as close to the TV set as
possible which will produce the best phase characteristics.
If the TV and Optisound are mounted in the corner of the room you will also beneВїt from a signiВїcant
reinforcement in the bass produced from the Optisound and the TV speakers.
8
NOTES:
9
NOTES:
10
SPECIFICATIONS
UK technical enquiries
For international tecnhical
support please contact
the distribution agent for your
country. Please visit
www.vibeaudio.co.uk/contact
for more details.
9
LIMITED WARRANTY
port being covered or obstructed
Документ
Категория
Без категории
Просмотров
8
Размер файла
1 584 Кб
Теги
1/--страниц
Пожаловаться на содержимое документа