close

Вход

Забыли?

вход по аккаунту

?

How to Pin and Tack Reference Powerpoint

код для вставкиСкачать
1. Place the fabric right sides
together (with the nice side
inside) and pin approximately
1cm from the edge where you
wish to sew.
2. Thread your needle with
tacking thread the length of
your hand to your elbow. Use
a back tack (one stitch on top
of another) to start sewing
1cm from the edge. Your
stitches should be
approximately 1cm long, with
spaces of 1cm between each
stitch. Finish your line of
running stitch with another
back tack to secure.
3. When you have finished,
remove the pins. Set the
sewing machine to sew a running
or straight stitch as follows;
Stitch width = 0 Stitch length = 3
Machine your seam and then
unpick the tacking thread
carefully using a pin.
START
Документ
Категория
Презентации
Просмотров
6
Размер файла
68 Кб
Теги
1/--страниц
Пожаловаться на содержимое документа